Low maintenance, weather-ready, and built to last decades. Hundreds of styles and colors to match your home's character.
Get a Free Vinyl Estimate: +1-844-782-0929
We focus on exterior cladding, and vinyl siding is a core specialty. We stock multiple grades, know the brands, and understand how each product performs across Lakewood, IL's seasonal conditions.
Choosing vinyl siding involves more than picking a color. We discuss profile style, panel width, trim coordination, and how different finishes photograph in natural light on your home.
Proper installation technique matters as much as product quality. We cut on score, nail in the center of slots, leave correct overlap, and seat J-channels and trim pieces so the system performs as designed.
Every vinyl siding project we complete in Lakewood includes a written workmanship warranty alongside the manufacturer product warranty. You have coverage on both the materials and the installation labor.
Complete vinyl siding installation on new construction or over-existing cladding. We handle prep, house wrap inspection, and full installation with proper trim, flashing, and accessories.
We remove and properly dispose of existing siding, inspect the substrate for moisture or rot before covering it, and install new vinyl to manufacturer specs. Your home gets a fresh exterior backed by a full warranty.
The foam layer in insulated vinyl also eliminates the hollow sound conventional siding produces when struck, and it reduces thermal bridging through the wall studs -- a meaningful upgrade in colder climates.
Vinyl shake panels replicate the texture of hand-split cedar without maintenance demands. Used on gable ends, accent walls, and full facades, they add dimensional character to any home style.
Vertical installation requires different technique than horizontal lap. Expansion allowances run differently, and water management at the top edge demands precise flashing detail. Our crews have the experience to get it right.
Coordinated vinyl soffit and fascia complete the siding system and protect your roofline from moisture intrusion. We match profiles and colors to your siding for a finished, continuous look on every elevation.
Standard vinyl suits sheltered locations well. Premium grades matter most on high-sun, high-wind exposures where panel stiffness and color stability over time are priorities.
Thickness is measured in thousandths of an inch (mils or gauge). Thicker panels feel more solid, flex less in wind, and generally carry longer fade warranties. We provide thickness comparisons from the brands we carry so you can make an informed choice.
Standard vinyl is the right call for many projects. Insulated vinyl is worth specifying when wall R-value is low, when quieter exterior performance matters, or when the existing sheathing benefits from the added rigidity.
We stock impact-rated options and recommend them for exposed elevations. Manufacturer documentation on impact ratings is available on request -- you should know what you are installing before work begins.
Our estimator documents the scope, identifies any substrate issues that need addressing, and gives you a quote you can actually plan around -- no ranges, no surprises.
Once you approve the estimate, we finalize your style and color selection using physical samples on your home, then place the material order. Lead times are confirmed before your install date is scheduled.
Our crew prepares the substrate, installs starter strips and corner posts to spec, and works systematically across each elevation. Every panel goes on at the correct tension, with proper overlap and expansion allowances.
Your sign-off comes only when you are satisfied. We resolve any punch-list items before leaving the site and leave you with a clear record of what was installed and what is covered.
Vinyl siding is manufactured from polyvinyl chloride (PVC) resin compounded with stabilizers, pigments, and impact modifiers. The resulting panels are extruded at consistent thickness, then embossed with surface textures that mimic wood grain, cedar shake, or smooth lap board. Because the color runs through the full thickness of the panel rather than sitting as a surface coat, minor scratches and scuffs do not expose an underlying substrate. This characteristic distinguishes vinyl from painted wood or fiber cement and contributes directly to its maintenance advantage.
The physical behavior of vinyl in Lakewood, IL's climate is the central installation challenge. PVC expands considerably with temperature increases and contracts in cold. Panels installed on a mild spring day will be in a different dimensional state than the same panels on a July afternoon or a January morning. A professional crew nails into the center of the elongated nail slots so each panel floats freely within the designed tolerance. Driving nails tight -- even one or two per panel -- creates a fixed point around which thermal stress concentrates, producing the waves and buckles homeowners associate with cheap installation. The material itself is not cheap; the technique was.
Vinyl siding grades are measured primarily by panel thickness, expressed in thousandths of an inch. Products at the lower end of the market measure around .040 inches. Premium lines reach .044 to .050 inches or more. Thicker panels carry greater impact resistance, flex less in high winds, and maintain a flatter profile over long spans between studs. They also tend to carry more favorable fade warranties from manufacturers, because the pigment loading in premium grades is formulated for longer color stability under UV exposure. For most standard residential applications in Lakewood, a mid-range to premium thickness is a reasonable specification. Budget-grade panels are appropriate for low-exposure applications like enclosed porches or garage elevations with minimal sun and wind exposure.
Insulated vinyl siding takes the standard product and bonds a layer of contoured XPS or EPS foam to the back face. This foam layer does several things simultaneously. It increases the thermal resistance of the wall assembly modestly but consistently, typically adding between R-2 and R-4 to the exterior envelope depending on foam thickness. It eliminates the hollow-drum sound that standard vinyl produces when rain or hail strikes it. It also adds panel stiffness, which reduces oil-canning (the slight waviness visible on flat panels in raking light) and provides a more solid feel when the panel is pushed or struck. For older homes in Lakewood, IL with thin wall assemblies or insufficient insulation, the thermal contribution of insulated vinyl is a meaningful bonus on top of a new exterior appearance.
Beyond occasional washing, vinyl siding in Lakewood, Lakewood, IL asks very little of the homeowner. Do not use harsh solvents, abrasive compounds, or undiluted bleach on vinyl panels -- these can affect the surface finish permanently. For mildew on north-facing elevations, a soft brush with a diluted cleaner and a rinse works reliably. When you notice caulking at trim joints beginning to crack or pull away from the surface, that is the time to call for a caulk refresh before water finds its way behind the trim. Attending to caulk maintenance is the main annual task vinyl siding places on a homeowner, and it is a minor one.
Properly installed vinyl in Lakewood, Lakewood, IL holds up for a long time when the installation fundamentals are correct. Warranty documents from reputable manufacturers cover decades of product performance. What they do not cover is installation error, which is why workmanship warranty from your contractor matters as much as the product warranty itself. When you invest in a new exterior, the contractor's commitment to their own work is the most meaningful assurance of long-term performance. We back ours in writing.
"I was nervous about committing to a color without seeing it on the house. SOS Roofing and Siding brought samples out, held them up against different elevations, and we made a confident decision. The finished result looks exactly as we imagined."
"The crew upgraded us to insulated vinyl after showing us the cost difference and what it would do for our north-facing wall. Best decision we made on the whole project."
"The old vinyl on our house was bubbling and wavy -- classic bad installation from whoever put it on years ago. SOS Roofing and Siding removed it, found some moisture damage on the sheathing underneath, fixed it before putting new vinyl on, and documented everything. That kind of transparency is rare."
"From the estimate to the final walkthrough, every step was exactly as described. No cost overruns, no surprises, no missing trim pieces. Just a clean finished product and a crew that takes pride in the work."
